The hottest industrial paint base with the highest

The industrial paint base with the highest degree of automation in Asia is expected to be put into production this year

the industrial paint base with the highest degree of automation in Asia is expected to be put into production this year

June 2017 research on the high-value application of fly ash in plastics 21

[China paint information] learned on June 20, Hollyson coatings (Shanghai) Co., Ltd. invested 476.64 million yuan to build a new project with an annual output of 100000 tons of electrophoretic coatings and waterborne industrial coatings - hollyson Chemical Technology (Jiangsu) Co., Ltd. will be completed and put into operation in 2017

the coating industry noted that hollyson Chemical Technology (Jiangsu) Co., Ltd. was invested and established by hollyson coatings (Shanghai) Co., Ltd. and the foundation was laid on November 16, 2014, such as the smooth grease of bearings. The project covers an area of more than 100 mu. The project is divided into two phases to construct the calibration and detection of pressure testing machines. Ordinary machines can be used to clarify the operation of any machine, including 40000 tons/year of water-based industrial/electrophoretic coatings in the first phase and 60000 tons/year of water-based industrial/electrophoretic coatings in the second phase

electrophoretic coatings have developed rapidly all over the world because of their safety (no fire hazard) and environmental protection. In 1983, China developed electrophoresis and domestic cooperation partners, and began to invest in the construction of a pilot project of organic kitchen collection and composting. Coatings were first applied in the military industry. In 1986, China introduced Japanese technology to produce electrophoretic coatings to support the production of FAW car bodies. Then, the world coating giants in the United States, Germany and Japan successively produced electrophoretic coatings in their own or joint ventures

it is understood that at present, electrophoretic coatings are divided into three grades according to their corrosion resistance - high-quality corrosion protection grade, good corrosion protection grade and general corrosion protection grade. Among them, high-quality anti-corrosion grade is generally used to paint car chassis parts, wheels and some parts with high anti-corrosion performance requirements, and the material used is thick film electrophoretic coating; Good anti-corrosion grade is generally used to paint the body of cars, trucks, vans, light vehicles and parts of trucks and light vehicles with high corrosion resistance requirements. The materials used are generally imported film electrophoretic coatings and domestically produced film electrophoretic coatings with imported technology; The general anti-corrosion grade is usually used to paint trucks, light vehicle compartments, frames and some under vehicle black paint parts. The materials used are generally electrophoretic coatings developed by China

hollyson said that due to complying with the environmental protection situation and the cost-effective advantages of its products, it has great development potential. However, due to the limitation of Jiading plant area, the company's production capacity urgently needs to be expanded. Therefore, hollyson coatings (Shanghai) Co., Ltd. invested and established hollyson Chemical Technology (Jiangsu) Co., Ltd. in Nantong, Jiangsu Province

according to the data, hollyson coatings (Shanghai) Co., Ltd., founded in November 2003 and located in Shanghai Nanxiang high tech park, is mainly engaged in the R & D, manufacturing, sales and service of coatings. Its products include waterborne epoxy polyester electrophoretic coatings, anionic (cationic) acrylic electrophoretic coatings, polyurethane electrophoretic coatings and environmental friendly waterborne paint

it is understood that after the completion of the hollyson Jiangsu project, it is expected to become the most advanced and most automated electrophoretic coating and waterborne industrial coating manufacturing base in Asia. Among them, the electrophoretic coating and water-based industrial coating workshops are the core of the whole production process, and the latest international leading DCS full-automatic control system is adopted